1. Safety Precautions:

(1) Don't use this machine for other purposes except for Cutting;

(2) While the machine is working, don't touch the rotary blade to avoid getting injured;

(3) Don't use this machine when the power requirement (voltage and frequency) are not reached, you should be clear about the actual working power supply;

(4) Don't put the machine at the place of high temperature and insolate in sun shine.

(5) If any liquid or other materials drop into the machine, turn the switch off immediately and pull the plug out of the wall socket; Please don't start the machine again until the machine is thoroughly checked and repaired by an expert in this line;

(6) Don't install other parts at will except the original parts of this machine;

(7) Don't operate the machine over-worked, don't dash any parts of this machine.

We reserve the right to change the information and instruction of the manual, we won't notice separately and do not bear the responsibility.

2. How To Use:

1. Select a liner lens or lens firstly, fix the suction disc in the central position of liner lens or lens, then install them to the chuck device and clamp the lens by the knob.

2. Put a lens which has been marked the axis on lens meter and layout blocker into the position of lens and then fix it by the left knob and be ready to cut.

3. Turn on the switch and put down the machine head slowly, keep the lens in the central position of miller.

4. Lift the machine head upward after the template rotates for a circle, carefully take out the finished lens, and then trim the burr on the hand edge.

1. Quick speed, easy operation, saving time for your processing.

2. Imported Milling cut.

3. With a knob to control the size of lens to cut.

4. Save much more time for your glass shop than that of in big auto edger

Voltage: 220V/50HZ or 110V/60HZ

Power: 60W

Dimension: 29×24×27(cm)

Weight: 5kg